Siemens SITRANS FC430 Operating Instructions Manual page 91

Note
Approval identifications
Approval certificates and notified body identifications are available for download at
www.siemens.com (http://support.automation.siemens.com/WW/view/en/60666565/134200).
FCS400 sensor specification nameplate
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
⑫
⑬
⑭
⑮
⑯
⑰
⑱
FC430 (From firmware 4.0)
Operating Instructions, 06/2017, A5E39789392-AA
Ex approvals Ex approval specifications for the sensor (ATEX example; for details on all
approvals refer to Bus communication (Page 239))
Consult the operating instructions
CE CE mark
0539 Notified Body ID (ATEX example)
Ex Ex mark, Installation in hazardous areas (Page 20)
MAWP Maximum allowable working pressures at 20 °C (68 °F) and 200 °C (392
°F) (max. temperature (TS))
Fluid group Fluid group statement required by PED
Wetted material Measuring tube/process connection materials
Min. fluid temper‐ Minimum fluid temperature
ature
Size DN Nominal size
Conn. Process connection type and size
Year of Manufac‐ Manufacturing year
ture More detailed manufacturing date information is given in the serial number
found on the identification nameplate
Cal. Factor Calibration factor
Qm (min) Minimum and nominal massflows with water at 20 °C (68 °F)
Qm (nom)
Power Supply Power supply (not given on the compact variant because it is internal)
Enclosure IP Degree of protection
Ambient Temp. Ambient temperature range
Accuracy Massflow, density calibration accuracy
Connecting
5.4 Device nameplates
91