HMI menu ID
Parameter
4.3.9.13
Totalizer 2 unit
4.3.9.13
Totalizer 2 unit
4.3.9.14
Totalizer 3 unit
4.3.9.14
Totalizer 3 unit
4.3.9.14
Totalizer 3 unit
4.3.10
Damping
4.3.10
Damping value
4.3.10.1
Process values (1)
FC430 (From firmware 4.0)
Operating Instructions, 06/2017, A5E39789392-AA
Description
Select Totalizer 2 unit for the
communication interface. Unit is
not applied at Local User Inter‐
face.
Select Totalizer 2 unit for the
communication interface. Unit is
not applied at Local User Inter‐
face.
Select Totalizer 3 unit for the
communication interface. Unit is
not applied at Local User Inter‐
face.
Select Totalizer 3 unit for the
communication interface. Unit is
not applied at Local User Inter‐
face.
Select Totalizer 3 unit for the
communication interface. Unit is
not applied at Local User Inter‐
face.
Define the damping filter time
constant.
Select the process values for
damping
E.12 Communication
Default value
Value range
[unit]
L
L, hL, m³, Ugal,
BL, BB, BO, in³,
ft³, yd³, gal, bush
SL
SL, Nm³, SL, Sft³,
Sm³
kg
g, kg, t, lb, STon,
oz, T
L
L, hL, m³, Ugal,
BL, BB, BO, in³,
ft³, yd³, gal, bush
SL
SL, Nm³, SL, Sft³,
Sm³
0.0 s
0 to 100.0 s
● Mass flow
● Volume flow
● Standard
volume flow
● Standard
density
● Totalizer 1
● Totalizer 2
● Totalizer 3
● Dosing
● Density
● Medium
temperature
Default settings
Access
level
User
User
User
User
User
User
User
529