E.4 Totalizer - Siemens SITRANS FC430 Operating Instructions Manual

Default settings

E.4 Totalizer

E.4 Totalizer
Table E-7 Totalizer 1
HMI menu ID Parameter
2.3.1.1 Process value
2.3.1.2 Unit 1)
2.3.1.2 Unit 2)
2.3.1.2 Unit 3)
2.3.1.3 Custom units
2.3.1.4 Custom conversion fac‐
tor
2.3.1.5 Decimal Places 1) 2) 3)
2.3.1.6 Direction
338
Description
Select process value for totaliza‐
tion.
Select unitss for triggered total‐
izer 1. Units are not applied at
communication interface.
Select unitss for triggered total‐
izer 1. Units are not applied at
communication interface.
Select unitss for triggered total‐
izer 1. Units are not applied at
communication interface.
Define a name for the custom
units. The custom units can then
be selected in the units list.
Define a mass factor for the cus‐
tom units. The factor is based on
SI mass units kg
Define the decimal point for the
process value triggered in the
Local display.
Select totalizing direction.
Default value Value range
[unit]
Mass flow
● Mass flow
● Volume flow
● Standard
volume flow
● Fraction A
● Fraction B
kg Kg, t, STon, T, oz,
lb, Custom
L L, hl, m³, gal, gal
(UK),bbl31.5,
bbl31, bbl42, in³,
ft³, yd³, bush, Cus‐
tom
SL Nl, Nm³, SI, Sft³,
Sm³, Custom
Sensor depend‐
ent
1.00
2
● Auto
● No decimal
place
● 1
● 2
● 3
● 4
● 5
● 6
Forward count‐ ● Forward
ing
counting and
backward
counting
● Forward
counting
● Backward
counting
● Hold
FC430 (From firmware 4.0)
Operating Instructions, 06/2017, A5E39789392-AA
Access
level
User
User
User
User
User
User
User
User