Connecting - Siemens SITRANS FC430 Operating Instructions Manual

Introduction
Note
This manual applies to the Coriolis flowmeter SITRANS FC430
This document are standard delivered in electronic media with the device. Latest version can
be downloaded at www.siemens.com
60666565/134200)
1.1 Purpose of this documentation
These instructions contain all information required to commission and use the device. Read
the instructions carefully prior to installation and commissioning. In order to use the device
correctly, first review its principle of operation.
The instructions are aimed at persons mechanically installing the device, connecting it
electronically, configuring the parameters and commissioning it, as well as service and
maintenance engineers.
1.2 Document history
The following table shows major changes in the documentation compared to the previous
edition.
The most important changes in the documentation when compared with the respective
previous edition are given in the following table.
Edition
06/2017
Use the device to measure process medium in accordance with the information in the
Operating Instructions.
Note
Use in a domestic environment
This Class A Group 1 equipment is intended for use in industrial areas.
In a domestic environment this device may cause radio interference.
FC430 (From firmware 4.0)
Operating Instructions, 06/2017, A5E39789392-AA
(http://support.automation.siemens.com/WW/view/en/
Note
First edition
1
9