D.3 Certificates - Siemens SITRANS FC430 Operating Instructions Manual

Certificates and support

D.3 Certificates

D.3 Certificates
You can find certificates on the Internet at online support portal
processinstrumentation/certificates) or on an included DVD.
Certification documents including calibration report are supplied with each sensor included on
the SensorFlash. Material, pressure test, and factory conformance certificates are optional at
ordering.
Note
EAC declaration
The EAC declaration is available on the SensorFlash SD card delivered with the device.
324
(http://www.siemens.com/
FC430 (From firmware 4.0)
Operating Instructions, 06/2017, A5E39789392-AA