Siemens SITRANS FC430 Operating Instructions Manual page 408

Default settings
E.5 Inputs and outputs
HMI menu ID Parameter
2.4.5.8.3 Sensor alarms (2)
408
Description
Select one or more Individual
alarms. The output is active
when one of the Individual
alarms occurs.
Default value Value range
[unit]
● 64 Frame
temp. below
limit
● 65 Frame
temp. above
limit
● 66 "Standard
deviation"
above limit
● 67 "Zero point
offset" above
limit
● 68 Zero point
adjustment
failed
● 69 "Empty
tube limit"
exceeded
● 70 Too little
fluid in tube
● 71 Parameter
storage
malfunction
● 72 Internal
error in sensor
● 73 Internal
error in sensor
● 74 Internal
error in sensor
● 75 Internal
error in sensor
● 76 Internal
error in sensor
● 77 Internal
error in sensor
● 78 Unstable
measurement
condition and
● 79 Auto
filtering
● 87 The sensor
is stabilizing
FC430 (From firmware 4.0)
Operating Instructions, 06/2017, A5E39789392-AA
Access
level