Sensorflash - Siemens SITRANS FC430 Operating Instructions Manual

Technical data
11.11 PED
11.10

SensorFlash

Table 11-30 SensorFlash
Description
Capacity
File system support
Temperature range
Operation:
Storage:
Note
SensorFlash functions support
Only the supplied 4 GB SD cards are supported for backup, restore, logging, and firmware
update.
11.11 PED
The pressure equipment directive 2014/68/EU applies to the alignment of the statutory orders
of the European member states for pressure equipment. Such equipment in the sense of the
directive includes vessels, pipelines and accessories with a maximum allowable pressure of
more than 0.5 bar above atmospheric. Flowmeters are considered as piping.
A detailed risk analysis of the flowmeter has been performed in accordance with the PED
2014/68/EU. All risks are assessed to be "none" provided that the procedures and standards
referenced in these operating instructions are observed.
Division according to the danger potential
Flowmeters, which are categorized as piping, are divided into categories according to danger
potential (medium, pressure, nominal diameter). The flowmeters fall into the categories I to III
or they are manufactured according to Paragraph 3 - Sound Engineering Practice (SEP).
The following criteria are decisive for assessment of the danger potential, and are also shown
in Diagrams 6 to 9.
Fluid group
● Aggregate state
● Type of
244
Group 1 or 2
Liquid or gaseous
pressurized
equipment
Product of pressure and volume (PS * V [barL])
– Pipeline
Specification
SD card
4 GB
FAT32 / 8.3
-40 to +85 °C (-40 to 185 °F)
-40 to +100 °C (-40 to 212 °F)
Operating Instructions, 06/2017, A5E39789392-AA
FC430 (From firmware 4.0)