C.1 Operating Conditions - Siemens SITRANS FC430 Operating Instructions Manual

Custody Transfer
The SITRANS FC430 flowmeter can be ordered with custody transfer measurement for liquids
other than water according to OIML R 117-1 with accuracy class 0.3.
Note
Ordering
Only flowmeters with local display ordered with Z-option "B31" (Custody Transfer) can be set
to this mode.
When "B31" is specified, the transmitter specification nameplate shows "SW Function" as "CT
standard".
Available versions:
● Standard: 7ME4613-XXXXX-XXX3-Z AXX+B31+EXX+FXX
● Hygienic: 7ME4623-XXXXX-XXX3-Z AXX+B31+EXX+FXX
● NAMUR: 7ME4713-XXXXX-XXX3-Z AXX+B31+EXX+FXX
C.1 Operating conditions
The operating conditions stated in the evaluation certificate may be reduced compared to the
operating conditions stated on the product nameplates. A copy of the certificate is included on
the SensorFlash and can be downloaded from (www.siemens.com/FC430)
Note
Operating conditions
Only the operating conditions stated in the evaluation certificate are valid.
For identification of custody transfer evaluated devices, see Device identification (Page 87)
C.2 Verification
Custody transfer requirements
All custody transfer devices are verified on site using reference measurements.
FC430 (From firmware 4.0)
Operating Instructions, 06/2017, A5E39789392-AA
C
311