Siemens SITRANS FC430 Operating Instructions Manual page 390

Default settings
E.5 Inputs and outputs
HMI menu ID Parameter
2.4.4.4 Sensor alarms (2)
390
Description
Select one or more Individual
alarms. The output is active
when one of the Individual
alarms occurs.
Default value Value range
[unit]
● 64 Frame
temp. below
limit
● 65 Frame
temp. above
limit
● 66 "Standard
deviation"
above limit
● 67 "Zero point
offset" above
limit
● 68 Zero point
adjustment
failed
● 69 "Empty
tube limit"
exceeded
● 70 Too little
fluid in tube
● 71 Parameter
storage
malfunction
● 72 Internal
error in sensor
● 73 Internal
error in sensor
● 74 Internal
error in sensor
● 75 Internal
error in sensor
● 76 Internal
error in sensor
● 77 Internal
error in sensor
● 87 The sensor
is stabilizing
● 108 Media
temperature
flow above
alarm limit
● 109 Media
temperature
FC430 (From firmware 4.0)
Operating Instructions, 06/2017, A5E39789392-AA
Access
level
User