HMI menu ID
Parameter
4.2.8.4
Fraction units
4.2.8.5
Fraction units
4.2.8.8
Density units
4.2.8.11
Temperature units
4.2.8.13
Totalizer 1 unit
4.2.8.13
Totalizer 1 unit
4.2.8.13
Totalizer 1 unit
4.2.8.14
Totalizer 2 unit
4.2.8.14
Totalizer 2 unit
4.2.8.14
Totalizer 2 unit
FC430 (From firmware 4.0)
Operating Instructions, 06/2017, A5E39789392-AA
Description
Select fraction unit for the com‐
munication interface. Unit is not
applied at Local User Interface.
Select fraction unit for the com‐
munication interface. Unit is not
applied at Local User Interface.
Select density unit for the com‐
munication interface (mass/vol‐
ume).
Select temperature unit for the
communication interface.
Select Totalizer 1 unit for the
communication interface. Unit is
not applied at Local User Inter‐
face.
Select Totalizer 1 unit for the
communication interface. Unit is
not applied at Local User Inter‐
face.
Select Totalizer 1 unit for the
communication interface. Unit is
not applied at Local User Inter‐
face.
Select Totalizer 2 unit for the
communication interface. Unit is
not applied at Local User Inter‐
face.
Select Totalizer 2 unit for the
communication interface. Unit is
not applied at Local User Inter‐
face.
Select Totalizer 2 unit for the
communication interface. Unit is
not applied at Local User Inter‐
face.
E.12 Communication
Default value
Value range
[unit]
kg/h
g/s, g/min, g/h, kg/
s, kg/min, kg/h, kg/
d, t/min, t/h, t/d, lb/
s, lb/min, lb/h, lb/
d, STon/min,
STon/h, STon/d,
T/h, T/d, Custom
m³/h
L/s, L/min, L/h, m³/
s, m³/min, m³/h,
m³/d, ML/d, Ugal/
s, Ugal/min, Ugal/
h, Ugal/d, BBPS,
BBPM, BBPH,
BBPD, BOPS,
BOPM, BOPH,
BOPD, ft³/s, ft³/
min, ft³/h, ft³/d, gal/
s, gal/min, gal/h,
gal/d, Mgal/d,
Custom
kg/m³
µg/L, µg/m³, mg/
L, g/mL, g/cm³, g/
L, kg/L, kg/m³, lb/
in³, lb/gal, lb/ft³,
STon/yd³, Custom
°C
°C, °F, °R, K
kg
g, kg, t, lb, STon,
oz, T
L
L, hL, m³, Ugal,
BL, BB, BO, in³,
ft³, yd³, gal, bush
SL
SL, Nm³, SL, Sft³,
Sm³
kg
g, kg, t, lb, STon,
oz, T
L
L, hL, m³, Ugal,
BL, BB, BO, in³,
ft³, yd³, gal, bush
SL
SL, Nm³, SL, Sft³,
Sm³
Default settings
Access
level
User
User
User
User
User
User
User
User
User
User
523