Siemens SITRANS FC430 Operating Instructions Manual page 519

HMI menu ID Parameter
3.8.3.3 Alarm class
3.8.3.3 NAMUR status signal
Audit trail
Table E-41 Audit trail
LUI menu ID Parameter
3.9.1 Parameter change log
3.9.2 Clear parameter change
log
3.9.3 Firmware update
change log
3.9.4 Clear FW update
change log
Table E-42 Self test
HMI menu ID Parameter
3.10.1 Display Test
FC430 (From firmware 4.0)
Operating Instructions, 06/2017, A5E39789392-AA
Description
Simulate alarm class
Standard
Simulate NAMUR status signal
Namur
Description
Do you wish to clear the param‐
eter change log?
Do you wish to clear the firm‐
ware change log?
Description
Display test
E.9 Maintenance and diagnostics
Default value Value range
[unit]
● Maintenance
alarm
● Function
check
● Process value
alarm
● Process value
warning
● Maintenance
demanded
● Maintenance
required
● None
● Failure
● Function
check
● Out of
specification
● Maintenance
required
● None
Default value Value range
[unit]
Cancel
● Ok
● Cancel
Cancel
● Ok
● Cancel
Default value Value range
[unit]
Default settings
Access
level
User
User
Access
level
Read
only
User
Read
only
User
Access
level
User
519