Siemens SITRANS FC430 Operating Instructions Manual page 110

Commissioning
6.3 Local commissioning
Current/Frequency/Pulse
View Text
no.
4 Operation Mode
5-6 Output function
7-8 Scaling
9-10 Fail Safe Mode / Fail Safe Val‐
ue
Status
View Text
no.
5 Status Mode
6-7 Configuration
8-9 Output polarity and delay
Relay output - channels 3 to 4
The Relay Output can be configured to either discrete one or two-valve dosing control or alarm/
status.
View
no.
4
5-6
7-8
110
Options/Description
Select the output functionality
Configure the output basic settings
Configure the output scaling
Select the signal output reaction in case of a fault
Options/Description
Select the digital output functionality
Configure the alarm (only if Alarm Class or Individual alarms is selected)
Set the output polarity and delay
Text
Status Mode
Configuration
Output polarity and delay Set the output polarity and delay
Options/Description
Select the status output functionality
Configure the alarm (only if Alarm Class or Individual alarms is se‐
lected)
Operating Instructions, 06/2017, A5E39789392-AA
FC430 (From firmware 4.0)