Siemens SITRANS FC430 Operating Instructions Manual page 495

HMI menu ID Parameter
3.4.3.2.3 Error status
3.4.3.2.4 Pulse counter
3.4.3.2.5 Reset pulse counter
3.4.3.3 Channel 3 – input/output
3.4.3.3.1 Operation mode
3.4.3.3.2 Digital input value
3.4.3.3.2 Totalized amount
3.4.3.3.2 Output frequency
3.4.3.3.2 Digital output signal
3.4.3.3.2 Loop current
3.4.3.3.3 Error status
3.4.3.3.3 Error status
FC430 (From firmware 4.0)
Operating Instructions, 06/2017, A5E39789392-AA
Description
Error status - Current
Actual value of output pulses.
Status of the reset pulse counter
Set the output functionality you
want the channel to operate.
Select the digital input value
Actual value of totalized amount. [kg]
Actual value of frequency output. [Hz]
Actual value of status output.
Actual value of current output
Error status - pulse
Error status - frequency
E.9 Maintenance and diagnostics
Default value Value range
[unit]
● Upper
saturation
● Lower
saturation
● Fail-safe
behaviour
avtive
● Cable breal
● Loop current
deviation
Status output
● Off
● Current output
● Frequency
output
● Pulse output
● Status output
[mA]
● Upper
saturation
● Fail-safe
behaiviour
active
● Upper
saturation
● Lower
saturation
● Fail-safe
behaiviour
active
Default settings
Access
level
Read
only
Read
only
Read
only
Read
only
Read
only
Read
only
Read
only
Read
only
Read
only
Read
only
Read
only
495