Siemens SITRANS FC430 Operating Instructions Manual page 107

4-13
14-17
Inputs/Outputs wizard (menu item 1.4)
The Input/Output wizard will guide you through setup of inputs and outputs on channels 1 to
4. The availability of channels 2 to 4 depends on the product configuration.
View
no.
2
3-14
Channels 3 and 4 can only be assigned to one function (signal output, relay output or signal
input).
Current output - channel 1
The Current Output on Channel 1 is a 4 to 20 mA output with Profibus, Profinet, HART, Modbus,
X-bus communication. Channel 1 can be used in Functional Safety applications if ordered with
SIL option.
FC430 (From firmware 4.0)
Operating Instructions, 06/2017, A5E39789392-AA
Configure
Totalizer
View text
Select Channel
Configuration
Configure the process values (unit, low flow cut-off, limits, and hys‐
teresis)
Configure totalizers (if activated in operating view, it is possible to
reset totalizer without password access)
Options/Description
Select the channel to be configured
Configure selected channel (*: see appropriate graphic for configu‐
ration of the input/output function)
Commissioning
6.3 Local commissioning
107