1
3
①
②
③
④
7.1.1.4
Measurement views
Measurement views
Single value
1
①
FC430 (From firmware 4.0)
Operating Instructions, 06/2017, A5E39789392-AA
Long TAG
View number
Alarm icon
Alarm status text
Process value
The user-defined process value to be displayed is configured in menu
"View" (1-6) located at "Setup" → "Display"
2
4
Describes the measurement point and is shown in all operation views.
Can be changed via the menu "Long TAG" (3.1.1).
Shows the operation view number. The number refers to the view num‐
ber configured in the menu "Setup" → "Display".
Indicates an active alarm. Shows the alarm class, see Device status
symbols (Page 199).
Only shown if an alarm is active.
Describes the alarm. Only shown if an alarm is active.
Operating FC430
7.1 Operating instructions
123