Date/Time; Configuration Via User Interface - Siemens SICAM Q100 7KG95 Series Manual

The following interface displays are available:
[dw_display_language_regional, 1, en_US]
Figure 2-19
[dw_display_language, 1, en_US]
Figure 2-20
2.2.7

Date/Time

2.2.7.1

Configuration via User Interface

Setting Date/Time
To change the date/time settings in the Maintenance tab, proceed as follows:
•
In the navigation window, click Presets → Date/time.
[sc_preset_date_time, 3, en_US]
Figure 2-21
•
You can either get the date and time from the connected computer or adjust it manually.
Getting the PC Date and Time
•
Click Get PC date/time.
The computer time is displayed in the fields of the window and applied in the device.
SICAM, SICAM Q100 7KG95xx, Manual
E50417-H1040-C522-A8, Edition 09.2020
Language/Regional
Language
Maintenance Tab, Date/Time
2.2 Setting Process Connections and Other Settings
Device Functions
59