B.5 Menu Item 2.4: Inputs And Outputs - Siemens SITRANS FC430 Operating Instructions Manual

HMI menu structure

B.5 Menu item 2.4: Inputs and outputs

Level 3
No. Name
2.3.3 Totalizer 3
2.3.4 Reset All Totalizers
B.5 Menu item 2.4: Inputs and outputs
Table B-5 Current output on CH1
Level 3
No. Name
2.4.1 CH1 - output with HART
Note
Menu item visibility
The availability in the HMI of the menu items for channels 2, 3 and 4 depend on the I/O
configuration.
284
Level 4
No. Name
2.3.3.1 Process Value
2.3.3.2 Unit
2.3.3.3 Custom units
2.3.3.4 Custom conversion factor
2.3.3.5 Decimal places
2.3.3.6 Flow direction
2.3.3.7 Fail safe behaviour
2.3.3.8 Lower Limit Alarm
2.3.3.9 Alarm Hysteresis
2.3.3.10 Reset
2.3.3.11 Preset
Level 4
No. Name
2.4.1.1 Loop current mode
2.4.1.2 Active operation
2.4.1.3 PV selection
2.4.1.4 Direction
2.4.1.5 Loop current scale
2.4.1.6 Upper range value
2.4.1.7 Lower range value
2.4.1.8 Fail safe activation condition
2.4.1.9 Damping value
2.4.1.10 Fail-safe Behaviour
2.4.1.11 Fail Safe Value
2.4.1.12 Fail-safe minimum duration
Level 5
No. Name
Upper warning limit
2.3.3.10.2
Lower warning limit
2.3.3.10.3
2.3.3.10.4 Lower alarm limit
Hysteresis
2.3.3.10.5
Level 5
No. Name
FC430 (From firmware 4.0)
Operating Instructions, 06/2017, A5E39789392-AA