Siemens SITRANS FC430 Operating Instructions Manual page 100

Commissioning
6.3 Local commissioning
The first time the device is powered up, you will be prompted to set the language. The device
always starts up showing Language in English. When the language has been set, you will be
prompted to set the date and time.
After confirming/changing the date and time you will be asked if you want to start the Quick
Commissioning wizard. If you choose Yes (recommended), the Quick Commissioning wizard
will start. If you choose No, you accept the default values of the device, and the next HMI view
will be the operation view 1.
View
no.
1
2
3
4
6.3.3.2 Quick Commissioning wizard (menu item 1.1)
The Quick Commissioning wizard will guide you through configuration of parameters essential
for your application. You configure parameters essential for your application by selecting the
configuration path and subwizards appropriate for your application.
See also
Process Values wizard (menu item 1.3) (Page 106)
Gas Application wizard (menu item 1.5) (Page 111)
Pulsating Flow wizard (menu item 1.6) (Page 112)
Dosing Application wizard (menu item 1.7) (Page 113)
100
Language
About
Set Date and Time
Text
Language
"About"
Set Date and Time
Quick Commissioning
Options/description
Set the language: English, Deutsch, Français, Italiano, Español,
Português, РУССКИЙ, 汉语, Polski, Dansk, Svenska, Suomeksi
Information about the Quick Commissioning wizard
The set date and time (real time clock) is used for all time stamps
of logged information
The Quick Commissioning wizard comprises the most important pa‐
rameters/menus for quick configuration of the flowmeter
Operating Instructions, 06/2017, A5E39789392-AA
FC430 (From firmware 4.0)