Siemens SITRANS FC430 Operating Instructions Manual page 344

Default settings
E.4 Totalizer
HMI menu ID Parameter
2.3.3.10.12) Upper alarm limit
2.3.3.10.22) Upper warning limit
2.3.3.10.32) Lower warning limit
2.3.3.10.4 2) Lower alarm limit
2.3.3.10.5 2) Hysteresis
2.3.3.10.3) Upper alarm limit
2.3.3.10.23) Upper warning limit
2.3.3.10.33) Lower warning limit
2.3.3.10.4 ) Lower alarm limit
3
2.3.3.10.5 ) Alarm Hysteresis
3
2.3.4 Reset all totalizers
Process Value is set to Mass flow
1)
Process Value is set to Volume flow
2)
Process Value is set to Standard volume flow
3)
344
Description
Set upper alarm limit. Alarm is
triggered if totalizer 3 value is
above the limit.
Set upper warning limit. Waning
is triggered if totalizer 3 value is
above the limit.
Set lower alarm limit. Warning is
triggered if totalizer 3 value is
above the limit.
Set lower warning limit. Alarm is
triggered if totalizer 3 value is
above the limit.
Enter the hysteresis to avoid un‐
wanted rapid switching.
Set upper alarm limit. Alarm is
triggered if totalizer 3 value is
above the limit.
Set upper warning limit. Waning
is triggered if totalizer 3 value is
above the limit.
Set lower alarm limit. Warning is
triggered if totalizer 3 value is
above the limit.
Set lower warning limit. Alarm is
triggered if totalizer 3 value is
above the limit.
Sets the hysteresis for alarm
and warning limits. The hystere‐
sis is the distance between the
limits for activation and deactiva‐
tion of an alarm/warning.
Reset totalizer 1, totalizer 2 and
totalizer 3 to zero
Default value Value range
[unit]
[m ]
3
[m ]
3
[m ]
3
[m ]
3
0
[m ]
3
[normal m ]
3
[normal m ]
3
[normal m ]
3
[normal m ]
3
0
[normal m ]
3
Cancel
● Cancel
● Ok
FC430 (From firmware 4.0)
Operating Instructions, 06/2017, A5E39789392-AA
Access
level
User
User
User
User
User
User
User
User
User
User
User