Siemens SITRANS FC430 Operating Instructions Manual page 328

Default settings
E.2 Process Values
HMI menu ID Parameter
2.2.1.6.2 Upper warning limit
2.2.1.6.3 Lower warning limit
2.2.1.6.4 Lower alarm limit
2.2.1.6.5 Hysteresis
2.2.1.7 Flow adjustment
2.2.1.7.1 Adjustment factor
2.2.2 Volume flow
2.2.2.1 Units
2.2.2.2 Custom units
328
Description
Set upper warning limit. Warning
is triggered if mass flow value is
above the limit.
Set lower warning limit. Warning
is triggered if mass flow value is
below the limit.
Set lower alarm limit. Alarm is
triggered if mass flow value is
below the limit.
Sets the hysteresis for alarm
and warning limits. The hystere‐
sis is the distance between the
limits for activation and deactiva‐
tion of an alarm/warning.
Adjust displayed flow. Elimi‐
nates inaccuracies caused by
process conditions.
Select unit for displayed volume
flow rate. Unit is not applied at
communication interface.
Define a name for the custom
units. The custom units can then
be selected in the units list.
Default value Value range
[unit]
1) 1)
1) 1)
1) 1)
1) 1)
1 -1.999 to 1.999
m h l/s, l/min, l/h, l/ d,
3/
Ml/d, hl/s, hl/ min,
hl/h, hl/d, m
min, m
3
Mm /d, gal/s
3
(US), gal/min
(US), gal/h (US),
gal/d (US), Mgal/
d, gal/s (UK), gal/
min (Uk), gal/h
(UK), gal/d (UK),
bbl-beer/s, bbl-
beer/min, bbl-
beer/h, bbl-beer/
d, bbl/(US)s, bbl/
(US)min, bbl/
(US)h, bbl/(US)d,
kbbl/d, Mbbl/d,
bbl (US)/s, bbl
(US)/min, bbl
(US)/h, bbl (US)/
d, ft /s, ft
3
h, ft /d, Mft
3
min, af/h, af/d, in
s, in /min, in
3
in d, yd
3/
min, yd
bu/s, bu/min, bu/
h, bu/d, Custom
1)
FC430 (From firmware 4.0)
Operating Instructions, 06/2017, A5E39789392-AA
Access
level
User
User
User
User
Expert
User
/s, m /
3 3
/ h, m /d,
3
/min, ft /
3 3
/d, af/
3
/
3
/h,
3
/s, yd /
3 3
/h, yd /d,
3 3
User