Delete Access Authorization For A Device; 0X86) - WAGO I/O-SYSTEM 750 Manual

6.3.5.29 Delete Access Authorization for a Device (UnbindRemoteDevice, 0x86)
Access authorization of a remote device is deactivated. When this occurs, the
MAC-ID entered in the table space and associated data, such as the "User-
FriendlyName" are retained. However no connection to the device is estab-
lished and any pre-existing connection is interrupted. If the command is exe-
cuted in communication mode, this setting is temporary - at the next restart,
the connection is re-established. This offers the possibility of temporarily ex-
cluding defective remote devices from the network without changing the con-
figuration. If no attempt is made to connect the device after restart, the com-
mand must be called up in the configuration mode.
Conditions
*
Request
Byte
Arguments
Parameter
MBX_TARGET_TABLE_
AND_INDEX
Response
Byte
WAGO-I/O-SYSTEM 750
I/O Modules
Mailbox size Operating mode/profile
6 12 18 Config.
● ● ●
Setting is temporary in communication mode. In configuration mode,
the setting is saved, comparable to other settings, during a warm start.
7 6 5
2 2 2
0 MBX_UNBINDREMOTEDEVICE
1 T
2 MBX_TABLE_TABLE_AND_INDEX
7 6 5
2 2 2
0 MBX_UNBINDREMOTEDEVICE
1 T
Mailbox Command References
Real-
Ad hoc
time
● ● ●
4 3 2
2 2 2
-
Value Description
Bit 0...3 Table Index
Index 0...6 for WAGO devices of slots 1...7
Index 0...5 for external devices of slots 8...12
Bit 4...7 Target table
"2" for WAGO_DEVICE (slots 1...7)
"1" for EXTERNAL_DEVICE (slots 8...12)
4 3 2
2 2 2
MBX_RESULT
Appendix
Device role
Save
config.
Master Slave
● ● - *
1 0
2 2
1 0
2 2
• 157
Restart
-