WAGO I/O-SYSTEM 750 Manual page 197

Fieldbus independent i/o modules bluetooth rf transceiver
Table of Contents

Advertisement

8. Choose Net Forming in the navigation bar.
9. Choose the option All in the area Search for accessible devices and click
The MAC addresses of all located Bluetooth
of devices within range (see Figure 48).
The MAC address of the slave itself is displayed in this dialog.
Figure 48: Net forming
10. Search in the list for the MAC Address of the master that you wrote down
Note
At this point, the master must be in the configuration mode (factory setting).
11. Mark the found MAC Address of the master with a mouse click.
12. Click on the [>>] button to transfer the marked MAC Address to the list of
WAGO-I/O-SYSTEM 750
I/O Modules
Example Configurations using WAGO-I/O-CHECK
on the [Search] button to search the network for Bluetooth
environment. To limit the search results to WAGO 750 Series devices,
choose WAGO 750 instead.
in 6.5.1.2 so you can connect this master to your slave.
real-time devices (or ad hoc devices) for this slave.
The MAC Address of the master is entered in the first line (slot 1).
Appendix
®
devices in the
®
devices are displayed in the list
• 197
g064463e

Advertisement

Table of Contents
loading

Table of Contents