WAGO I/O-SYSTEM 750 Manual page 73

4.1.1.5.4 Block Transfer
This page displays the configuration block during uploading and downloading
of the process data (see Figure 32). The menu item Block Transfer is only
visible in the configuration mode.
Figure 32: Block transfer
Choose between the following menu items:
Table 31: Block transfer
Menu item
Upload
v
WAGO-I/O-SYSTEM 750
I/O Modules
Tools for Configuring and Operating
Configuring and Operating with WAGO-I/O-CHECK
Description
[Configuration]
Displays the configuration transferred from the module to the application.
[Search Results]
Displays the list of MAC addresses found during a search.
[Local Name]
Displays the complete local name of the module (in menu item "Settings", the
name may be incomplete due to insufficient mailbox size).
[Password]
Loads the set password.
[Remote Name]
Displays the device names of the connected modules. By entering an ID (see
page on Net forming), the device name of a special Bluetooth® device is
displayed.
• 73
g064453e
g064454e-58e