WAGO I/O-SYSTEM 750 Manual page 201

6.5.1.2.3 Process Data Allocation
Start with point 3 while the Bluetooth
51) is still open.
1. Click with the right mouse button on the Bluetooth
2. Choose Settings in the context menu. This opens a new window for mod-
3. In the navigation, choose the menu item PI-Mapping.
The process data allocation is loaded from the module and graphically dis-
played in WAGO-I/O-CHECK.
4. Move the ruler for the first slave to the right so that the first slave is as-
Figure 51: PI Mapping
5. Click on the [Write] button in the toolbar to write the altered configura-
6. Under navigation in the Operating Mode field, choose the real-time field
The example configuration is completed.
WAGO-I/O-SYSTEM 750
I/O Modules
Example Configurations using WAGO-I/O-CHECK
ule configuration.
signed the maximum possible number of bytes in the process image of the
master (see Figure 51).
tion in the module.
using the [Communication (Realtime)] button.
®
parameterization dialog (siehe Figure
®
module (master)
Appendix • 201
g064465e