WAGO I/O-SYSTEM 750 Manual page 67

Name
Authorization
Name
Password
Reconnect Time
IP Address
IP Subclass
LocalUpTime
Version of boot loader
Firmware version
Version of configura-
tion
Baseband controller
WAGO-I/O-SYSTEM 750
I/O Modules
Tools for Configuring and Operating
Configuring and Operating with WAGO-I/O-CHECK
Entry/Selection
OFF
Password
Link key
Entry as ASCII characters,
length dependent on mailbox
size (max. 16 characters)
Entry as ASCII characters,
length dependent on mailbox
size
_
_ _ _ ._ _ _ ._ _ _ ._ _ _
_ _ _ ._ _ _ ._ _ _ ._ _ _
_ _ days, _ _ hours., _ _ min.
_ _ . _ _ ._ _
_ _ . _ _ ._ _
_ _ . _ _ ._ _
_ _ . _ _ ._ _
Description
No authorization required.
For external devices, password entry
is required. The "Link key" for the
authorization must be recalculated
for each established connection.
The "Link key" for the authorization
does not have to be recalculated.
After a first-time connection, enter-
ing the password is no longer neces-
sary for an external device either.
Name of the local module (Blue-
®
tooth Device Name)
Password of the local module
Smallest time interval in seconds
between two attempts to connect
The local TCP/IP address
The local TCP/IP subnet mask
Operating time of the module since
the last restart
Version number of the boot loader
Version number of the firmware
Configuration version number
HCI version of the baseband con-
troller
• 67