Extended Register Structure (Configuration Block) - WAGO I/O-SYSTEM 750 Manual

190 • Appendix

Extended Register Structure (Configuration Block)

6.4 Extended Register Structure (Configuration Block)
Offset Register
(byte) no.
0 0...2
12 3
16 4
20 5...7
32 8
Length
Data Type Definition
(bytes)
9 Device status:
Byte 1 local status
Byte 2 status of master, slave 0
Byte 3 status of slave 1,2
Byte 4 status of slave 3,4
Byte 5 status of slave 5,6
Byte 6 status of external device 0,1
Byte 7 status of external device 2,3
Byte 8 status of external device 4,5
Byte 9 status of external device 6,7
1 Version of main configuration
2 Version of the subconfiguration
4 Configuration key
1 Process image size
1 Size and type of the mailbox inter-
face
1 Reserved
1 Technology
6 Local MAC address
1 Profiles supported
1 Local device role
1 ID of the communication profile
3 Reserved
1 WAGO device class
1 WAGO device subclass
1 Encryption mode
1 Use "Link Key"
Description
Local status
Is 0 if all configured, but at least one
WAGO device are connected. Oth-
erwise always 1.
Status of master, slaves or external
devices, 4 bits per device:
0 – not connected
1 – connection established
2 – connection exists
3 – device has been "parked".
Version of the configuration (see
Appendix 6.3.3.3)
Identification of the configuration
must have the value 0x1E55F15E
Size of the module bus process im-
age in bytes.
Bit 0...14: Size of the mailbox. Bit
15: Must have the value "1" (mail-
box type can be "faded in")
®
1 – Bluetooth
Local address of the Bluetooth
module, LSB first (see Appendix
6.3.5.3)
Bit field for the supported profiles;
the individual values are linked
binarily using OR:
1 – Lesswire L2CAP
2 – SPP
4 – PAN
See Appendix 6.3.5.20 and 6.3.5.21
See Appendix 6.3.5.10 and 6.3.5.11
See Appendix 6.3.5.8 and 6.3.5.9
See Appendix 6.3.5.8 and 6.3.5.9
See Appendix 6.3.5.12 and 6.3.5.13
0 – no authentication or PIN
1 – Authentication with "Link Key"
- see Appendix 6.3.5.14 and 6.3.5.15
WAGO-I/O-SYSTEM 750
®
I/O Modules