WAGO I/O-SYSTEM 750 Manual page 200

200 • Appendix
Example Configurations using WAGO-I/O-CHECK
vices are hidden for search request in communication operating mode; they
may also be entered like other hidden devices or devices being out of reach:
10. Enter the listed MAC address of the slave, which is already set in the
11. Give the device a name (UserFriendlyName), e.g., "Slave_01". This makes
12. Mark the slot with the entered MAC address and choose the value "Yes" in
13. Click on the [Write] button in the toolbar to write the altered configura-
Master and slave are now assigned to each other. The master is still in con-
figuration mode.
communication operating mode, manually in the allocated field. The fol-
lowing steps assume that you are using slot 1.
the overview easier for you.
the dropdown field Bind.
tion in the module.
WAGO-I/O-SYSTEM 750
I/O Modules