WAGO I/O-SYSTEM 750 Manual page 196

196 • Appendix
Example Configurations using WAGO-I/O-CHECK
Figure 46: Bluetooth
Attention
In order to perform the following steps, the Bluetooth
factory settings (default settings); i.e, you have not yet attempted any con-
figuration. If this is not the case, click on the [Default] button to reset the
module's configuration.
5. Click on [Data Frame] in the toolbar.
6. Enter (if not already set) a process image size of 48 bytes and a mailbox
Figure 47: Data structure
7. Click on the [Read] button in the toolbar to update the view of the con-
®
-specific parameter area
size of 12 bytes (see Figure 47).
figuration in the module.
g064418e
®
module must retain all
g064444e
WAGO-I/O-SYSTEM 750
I/O Modules