WAGO I/O-SYSTEM 750 Manual page 69

Select Other to manually enter which CoD should be used to filter the search
results (see Figure 27).
Figure 27: Filter according to device classes
To the right on the "net forming" page, the configured devices are displayed in
two lists. The upper list contains WAGO devices using the real-time profile.
The lower list contains both WAGO and/or external devices using the ad hoc
profile.
Selected devices within range are added to the real-time or ad hoc list by using
the [>>] button. MAC addresses or device names can also be moved to the ad
hoc or real-time list by drag & drop from the list of devices within range.
Selected devices are deleted from the real-time or ad hoc list using the [<<]
button. Deleting the device is also possible by double-clicking on the respec-
tive MAC address.
The tables on the Net forming page are filled as follows:
Table 28: Table identifiers in "Net forming"
Name
IS
MAC Address
Device name
Slot
UserFriendlyName ASCII characters
Bind
Note
Remember when assigning a "UserFriendlyName", you must display the en-
tire length of the name; a mailbox size of 18 bytes is necessary. With a
smaller mailbox setting, the full name is actually displayed within WAGO-
I/O-CHECK, but not completely saved, so when the name is read back from
the module, not all the characters are displayed.
WAGO-I/O-SYSTEM 750
I/O Modules
Tools for Configuring and Operating
Configuring and Operating with WAGO-I/O-CHECK
Entry/Selection
_ _
_ _ : _ _ : _ _ : _ _ : _ _ : _ _
ASCII characters
_
Yes
No
Description
Device ID for devices within range
MAC address of the device
Device name (cannot be changed)
Slot number of allocated device
Name assigned to a slot (can be
changed)
Bind device ("Yes")
Do not bind device ("No")
• 69
g064489e