WAGO I/O-SYSTEM 750 Manual page 198

198 • Appendix
Example Configurations using WAGO-I/O-CHECK
13. Give the device a name (UserFriendlyName), e.g. "MyMaster".
14. Mark the MAC Address and choose the value "Yes" in the dropdown field
15. Click on the [Write] button in the toolbar to write the altered configura-
You have now allocated a master to the Bluetooth
16. Under navigation in the Operating Mode field, choose the real-time mode
17. Proceed as in Section 6.5.1.2.2 to create a link from the side of the master
Bind (see Figure 49).
Figure 49: Bind device
tion in the module.
using the [Communication (Realtime)] button.
as well (Master ! Slave).
®
slave (Slave ! Master).
WAGO-I/O-SYSTEM 750
I/O Modules
g064464e