Status Display - WAGO I/O-SYSTEM 750 Manual

Object Groups
Time monitoring
Process image
Intersystem communica-
tion
Configuration
* The meaning of the individual status reports can be found in Appendix 6.3.6.3.
You can query the status with the set parameter by using the [Execute] button.

4.1.1.6 Status Display

Status reports are given in the status display in the lower area of the parame-
terization dialog. The display varies depending on the page accessed:
Settings, Net forming, PI Mapping, Block Transfer and Diagnostics.
Figure 35: Status display
WAGO-I/O-SYSTEM 750
I/O Modules
Tools for Configuring and Operating
Configuring and Operating with WAGO-I/O-CHECK
Status *
Ok
Watchdog
Ok
Process image is defective
A remote mailbox is active
Ok
Interruption in SPI communication
SPI is overloaded
Error in the mailbox communication
Ok
Configuration altered
Error in the network configuration
• 77
g064460e