Enter External Device In The Table Of Authorized Devices; (Allowremotedevice, 0X83) - WAGO I/O-SYSTEM 750 Manual

152 • Appendix
Mailbox Command References
6.3.5.26

Enter External Device in the Table of Authorized Devices

(AllowRemoteDevice, 0x83)

This command allows a remote device to access the local device. The MAC-
ID of the remote device is also entered in a table of the Bluetooth
Two device types are differentiated. Both types are entered in different tables:
WAGO devices for real-time communication:
External devices for communication over SPP
[1]
[2]
Note
Before an entered WAGO device is actually authorized for access, it must be
activated using command "BindRemoteDevice".
The access authorization can be withdrawn again via command "UnbindRe-
moteDevice" without requiring deletion of the device from the table.
Entries can be deleted from the table by overwriting with the MAC-ID
00:00:00:00:00:00. The affected slot is filled with zeros and no data is trans-
mitted to it. Changes to the device blocks do not change anything in the proc-
ess image mapping.
A MAC-ID (except for 00:00:00:00:00:00) may never occur more than once
in the table.
Conditions
®
Bluetooth
Specification: device supports the Serial Port Profile (SPP)
®
Bluetooth
Specification: device supports the Personal Area Network (PAN) Profile
Mailbox size
6 12 18
- ● ●
WAGO_DEVICE (0x20...0x26)
EXTERNAL_DEVICE (0x10...0x15)
Operating mode/profile
Real-
Config. Ad hoc
time
● - -
®
[1] [2]
or PAN :
Device role
Save
config.
Master Slave
● ● ●
WAGO-I/O-SYSTEM 750
subsystem.
Restart
-
I/O Modules