Navigation - WAGO I/O-SYSTEM 750 Manual

4.1.1.3 Navigation

You can toggel between the different configuration areas of the module by us-
ing the navigation on the left side of the screen (see Figure 22).
Figure 22: Navigation between configuration areas
Choose between the following menu items (see Table 25):
Table 25: Navigation between configuration areas
Menu item
WAGO-I/O-SYSTEM 750
I/O Modules
Tools for Configuring and Operating
Configuring and Operating with WAGO-I/O-CHECK
Description
[Settings]
Opens a page with general module parameters such as device name, MAC
address, device role, etc. These parameters can be altered here and loaded
to the module (see Section 4.1.1.5.1, "Settings").
[Net Forming]
Opens a page with device lists. Here, configured and bound devices
within range are displayed with MAC address and name and configured
(see Section 4.1.1.5.2, "Net Forming").
[PI Mapping]
Opens a page for the allocation of slave process data to slots in the master
(see Section 4.1.1.5.3, "PI Mapping").
[Block Transfer]
Opens a page for viewing the process data during uploading and
downloading. The menu entry "Block transfer" is only displayed in the
configuration mode (see Section 4.1.1.5.4, "Block Transfer").
[Diagnostics]
Opens a page with comprehensive diagnostic information on the status of
the module and the network as well as the connection quality (see Section
4.1.1.5.5, "Diagnostics"). The menu entry "Diagnostics" is only displayed
in the communication mode.
• 63
g064431e
g064432e-36e