Operating Modes - WAGO I/O-SYSTEM 750 Manual

2.1.1.7 Operating Modes

The Bluetooth
a certain function:
• Configuration mode
• Communication mode
Note
The Bluetooth
ceives it.
Note
If a Bluetooth
tooth
operated in the ad hoc profile, 6 slaves can be connected. The profile of the
Bluetooth
erty.
The operating mode is changed (see Figure 5) using WAGO-I/O-CHECK or
function blocks in the WAGO-I/O-PRO CAA and is controlled by mailbox
commands. After the operating mode is changed, the Bluetooth
automatically reset.
Configuration Mode
Figure 5: Operating modes
WAGO-I/O-SYSTEM 750
I/O Modules
®
module has two different modes available. Each mode fulfills
• in real-time profile
• in ad hoc profile
®
module is in configuration mode when the customer re-
®
master is operated in the real-time profile, up to 7 Blue-
®
slaves can be connected to the master. If the Bluetooth
®
slaves is irrelevant here. Modes and profiles are a master prop-
Saved Operation Mode
Communication Mode
Ad-Hoc Profile
After changing the saved operation mode via mailbox command,
a restart will be performed automatically.
Restart
Communication Mode
Real-Time Profile
I/O Modules • 21
Special Modules
®
master is
®
subsystem is
g064404e