Assigning Slave Process Data To Slots In The Master; Diagnostics - WAGO I/O-SYSTEM 750 Manual

4.2.6 Assigning Slave Process Data to Slots in the Master

Choose Settings in the context menu of the selected module (node view or
navigation) to open the parameterization dialog. Click on PI Mapping in the
navigation area.
The master only considers parts of the individual slave process images. Select
the size of these parts (cutoff) using the slide control. As an alternative, you
can enter the number of bytes in the entry field to the side.
Please note: Only up to 7 real-time devices or up to 6 ad hoc devices can be
active at the same time. These are the only devices you can bind by selecting
Bind - "Yes" in the PI Mapping configuration area for communication. If you
bind all 13 devices and each of the 13 slots is occupied, only the first six real-
time devices and the first ad hoc device will be free for communication.

4.2.7 Diagnostics

Choose Settings in the context menu of the selected module (node view or
navigation) to open the parameterization dialog. Click on Diagnostics in the
navigation area.
On this page, you will see status reports for the Bluetooth
mission channel and network displayed. Click on the [Start Diagnostics] but-
ton to constantly query current values. Click on [Stop Diagnostics] to display
the most recently received status with no further updating.
A click on the right column of the table opens a dialog window in which you
can query status information for individual slots or all existing connections by
selecting an object group and clicking [Execute].
Additional Information
An example configuration using WAGO-I/O-CHECK can be found in Ap-
pendix 6.5.
WAGO-I/O-SYSTEM 750
I/O Modules
Tools for Configuring and Operating
Configuring the Bluetooth® Module 750-644
• 81
®
device, the trans-