Starting Up The Bluetooth ® Modules - WAGO I/O-SYSTEM 750 Manual

194 • Appendix
Example Configurations using WAGO-I/O-CHECK
Figure 44: Hardware configuration
6.5.1.2 Starting up the Bluetooth
1. Determine which of your Bluetooth
2. Write down the MAC address of the slave:
6.5.1.2.1 Configuration of the Bluetooth
1. Start the WAGO-I/O-CHECK software (Version 3 or later).
2. Click on the [Identify] button.
Your node configuration is graphically displayed (see Figure 45).
®
Modules
and which module will function as the slave.
Write down the MAC address of the master:
®
modules will function as the master
®
Slave using "Net Forming"
0 0 : 0 6 : C 6 : _ _ : _ _ : _ _
0 0 : 0 6 : C 6 : _ _ : _ _ : _ _
WAGO-I/O-SYSTEM 750
I/O Modules
g064461e