WAGO I/O-SYSTEM 750 Manual page 16

Fieldbus independent i/o modules bluetooth rf transceiver
Table of Contents

Advertisement

16 •
I/O Modules
Special Modules
Module-Specific Data
Diagnosis (through optical display)
Diagnosis (through process image)
Configuration
Dimensions (mm) W x H x L
Weight
Accessories
Miniature WSB Quick marking system
External WAGO antenna, SMA, with magnet base (item no. 758-912)
Standards and directives (see Section 2.2 in manual on coupler/controller)
EMC CE Immunity to interference according to EN 61000-6-2 (2005), EN 61131-2 (2003)
EMC CE Emission of interference
Approvals (see Section 2.2 in manual on coupler/controller)
Additional Information
Please refer to the "Overview on WAGO-I/O-SYSTEM 750 approvals" docu-
mentation for detailed information on approvals.
You will find this on the CD ROM "AUTOMATION Tools and Docs"
(item no. 0888-0412) or online at
! WAGO-I/O-SYSTEM 750 ! System Description
UL
(UL508) (patent pending)
C
US
GL (Germanischer Lloyd) (patent pending)
Conformity marking
[3]
FCC approval
®
Bluetooth
approval
[1]
Quality of the radio link, signal strength, interference
[2]
plus approx. 6.5 mm excess length of the SMA socket
[3]
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two condi-
tions: (1) this device may not cause harmful interference, and (2) this device must accept any interfer-
ence received, including interference that may cause undesired operation.
Device status, connection status
Device status, connection status
WAGO-I/O-CHECK and WAGO-I/O-PRO CAA
[2]
24 x 64
x 100
approx. 85 g
according to EN 61000-6-3 (2007), EN 61131-2 (2003)
http://www.wago.com
[1]
[1]
, time monitoring
under documentation
WAGO-I/O-SYSTEM 750
I/O Modules

Advertisement

Table of Contents
loading

Table of Contents