Set An Led (Setled, 0Xd9) - WAGO I/O-SYSTEM 750 Manual

6.3.6.7 Set an LED (SetLED, 0xD9)

Call up sets color and blink code of a defined LED. This can be used to test
the functionality of the LED.
Note
To reinstate normal status information on the LEDs, the module must be re-
started. This can be triggered by the corresponding mailbox command or by
briefly switching off the power.
Conditions
Request
Byte
Arguments
Parameter
MBX_LED_NUMBER
MBX_LED_COLOR
MBX_LED_BLINK
WAGO-I/O-SYSTEM 750
I/O Modules
Mailbox size Operating mode/profile
6 12 18 Config.
● ● ●
7 6 5
2 2 2
0
1 T
2 MBX_LED_NUMBER
3 MBX_LED_COLOR
4 MBX_LED_BLINK
Value
[0 ...7]
MBX_LEDOFF (0x00)
MBX_LEDRED (0x01)
MBX_LEDGREEN (0x02)
MBX_LEDYELLOW (0x03) LED color yellow
MBX_LEDSTATIC (0x00)
MBX_LEDBLINK (0x01)
Mailbox Command References
Real-
Ad hoc
time
● - -
4 3 2
2 2 2
MBX_SETLED
-
Appendix
Device role
Save
config.
Master Slave
● ● -
1 0
2 2
Description
Selection of the LED, top left LED0,
to the right of that LED1, etc.
LED off
LED color red
LED color green
LED will remain lit
LED blinks
• 185
Restart
-