Testing The Process Data Exchange - WAGO I/O-SYSTEM 750 Manual

210 • Appendix
Example Configurations using WAGO-I/O-CHECK
6.5.2.2.9 Setting the Communication Mode for Master and Slaves
1. Set all Bluetooth
2. Follow the same steps for the Bluetooth
3. Wait 5 seconds after the execution.
Table 52: Mailbox command "SetLocalOperationMode"
Byte
PD/O
PD/I

6.5.2.3 Testing the Process Data Exchange

Test the successful exchange of process data in the same manner as described
in Section 6.5.1.3.
®
slaves with the mailbox command "SetLocalOperation-
Mode" (opcode 0x4A) to communication mode (0x03 for the ad hoc pro-
file) (see Table 52).
10 9 8
0x00 0x00 0x00
0x00 0x00 0x00
®
master.
7 6 5
0x00 0x00 0x03 0x02
0x00 0x00 0x00 0x00
4 Toggle Opcode empty
0x80 0x4A
0x80 0x4A
WAGO-I/O-SYSTEM 750
I/O Modules
C/S
0x00 0x20
0x00 0x60