Write The User-Friendly Name Of An Authorized Device (Setuserfriendlyname, 0X8D) - WAGO I/O-SYSTEM 750 Manual

168 • Appendix
Mailbox Command References
6.3.5.36 Write the User-Friendly Name of an Authorized Device (SetUserfriendly-
Name, 0x8D)
This command adds any alias to an entry in the list of authorized devices. This
name allows the user to give an intuitive name to the relevant removed
(remote) device, such as "Pump_001", "Gate4" or "Bus node_002". This does
not impact the Bluetooth device name of the remote device, as the alias is
stored in the local device.
By converting to ASCII characters, the name is simple to read and facilitates
the administration of the Bluetooth
The name can be a maximum of (mailbox size - 3) characters long. If the name
does not completely fill up the mailbox, it ends with the first null byte.
Note
The name entry is independent of the entered device (MAC-ID). The user-
friendly name has no direct relation to the Bluetooth
device that can be read with "GetRemoteDeviceName". Characters following
a null byte are ignored.
Conditions
Request
Byte
Mailbox size Operating mode/profile
6 12 18
(●) (●) ●
7 6
2 2 2
0 MBX_GETUSERFRIENLYNAME
1 T
2 MBX_TARGET_TABLE_AND_INDEX
3
...
17
®
device.
Real-
Config. Ad hoc
time
● - -
5 4 3 2
2 2 2
-
CHAR1
...
CHAR15
®
name of the remote
Device role
Save
config.
Master Slave
● ● -
1 0
2 2
WAGO-I/O-SYSTEM 750
Restart
-
I/O Modules