Read Back External Device From The Table Of Authorized Devices; (Getallowedremotedevices, 0X84) - WAGO I/O-SYSTEM 750 Manual

154 • Appendix
Mailbox Command References
6.3.5.27

Read Back External Device from the Table of Authorized Devices

(GetAllowedRemoteDevices, 0x84)

This command reads out and returns the MAC-ID of a remote device from the
table of authorized devices of the Bluetooth
of external devices entered in different tables:
WAGO devices for real-time communication:
External devices for communication over SPP
[1] Bluetooth
[2] Bluetooth
Note
Before an entered WAGO device is actually authorized for access, it must be
activated using the command "BindRemoteDevice".
The access authorization can be withdrawn again using the command "Un-
bindRemoteDevice" without making it necessary to delete the device from
the table.
Conditions
Request
Byte
Arguments
Parameter
MBX_TARGET_TABLE_
AND_INDEX
®
Specification: device supports the Serial Port Profile (SPP)
®
Specification: device supports the Personal Area Network (PAN) Profile
Mailbox size Operating mode/profile
6 12 18 Config.
- ● ●
7 6 5
2 2 2
0 MBX_GETALLOWEDREMOTEDEVICE
1 T
2 MBX_TARGET_TABLE_AND_INDEX
®
subsystem. There are two types
WAGO_DEVICE (0x20...0x26)
EXTERNAL_DEVICE (0x10...0x15)
Real-
Ad hoc
time
● - -
4 3 2
2 2 2
-
Value Description
Bit 0...3 Table Index
Index 0...6 for WAGO devices of slots 1...7
Index 0...5 for external devices of slots 8...12
Bit 4...7 Target table
"2" for WAGO_DEVICE (slots 1...7)
"1" for EXTERNAL_DEVICE (slots 8...12)
[1] [2]
or PAN :
Device role
Save
config.
Master Slave
● ● -
1 0
2 2
WAGO-I/O-SYSTEM 750
Restart
-
I/O Modules