Switch Mstp Version Command - ZyXEL Communications MSC1000G User Manual

This command displays the general MSTP settings on the switch. The following figure shows
an example.
ras> switch mstp show
config name
revision level
status
priority
hello time
max age
forward delay (s): 15
force version
max hops
msti priority
----- -----------------------------------------------
1- 8 32768 32768 32768 32768 32768 32768 32768 32768
9-16 32768 24576 32768 32768 32768 32768 32768 32768
mstid vid
----- -----------------------------------------------
0 1,11-4094
1 2
2 3-10
vid
--------- -----
1
2
3- 10
11-4094
ras>

28.8.11 switch mstp version Command

Syntax:
switch mstp version <rstp|mstp>
This command sets the system to use and send BPDUs for the specified spanning tree
protocol.
The following example sets the spanning tree protocol to RSTP.
ras> switch mstp version rstp
28.8.12 switch mstp vlanmap Command
Syntax:
switch mstp vlanmap <mstid> <start_vid> <end_vid>
Chapter 28 switch Commands
: test
: 1
: disabled
: 32768
(s): 5
(s): 20
: mstp
: 20
mstid
0
1
2
0
MSC1000G User's Guide
473