Alarm Adsl Profile Screen - ZyXEL Communications MSC1000G User Manual

Ies-5000 series management switch card

Hide thumbs Also See for MSC1000G:

Table of Contents

MSC1000G User's Guide

Table 65 ATM Profile (continued)

The bottom part of the screen lists the configured profiles.

Traffic Class

11.12 Alarm ADSL Profile Screen

Click Profile> Alarm ADSL in the navigation panel to open the following screen. Use this

screen to configure alarm profiles for the ADSL ports. Later you can apply the alarm ADSL

profiles to ADSL ports in the ADSL Port Setup screens.

Alarm ADSL profiles define ADSL port alarm thresholds. The system sends an alarm trap and

generates a syslog entry when the thresholds of the alarm profile are exceeded.

While you are modifying a profile, you can click New to start configuring a fresh

profile without saving your changes.

Click Cancel to start configuring the screen again.

This is the number of the ATM profile.

This name identifies the ATM profile.

This field displays the type of ATM traffic class: cbr (constant bit rate), vbr (real-time

variable bit rate), nrt (non-real time variable bit rate) or ubr (unspecified bit rate).

Select a profile's Select radio button and click Modify to edit the profile.

Select a profile's Select radio button and click Delete to remove the profile.

Chapter 11 Profile Screens