Port Pvc Set Command; Port Pvc Show Command - ZyXEL Communications MSC1000G User Manual

MSC1000G User's Guide

25.10.4 port pvc set Command

Syntax:
port pvc set <slot-port-vpi/vci> <profile> <mux> <pvid> <priority>
where
<slot-port-vpi/
vci>
<profile>
<mux>
<pvid>
<priority>
This command creates or modifies a PVC setting.
The following example sets a PVC on DSL port 5 on the line card in slot 7 with VPI 8, VCI
35, the DEFVAL profile, default VID 2 and priority 3.
ras> port pvc set 7-5-8/35 DEFVAL vcmux 2 3

25.10.5 port pvc show Command

Syntax:
port pvc show <slot>|<slot-port>|<slot-port-vpi/vci> [detail]
where
<slot-port-vpi/
vci>
[detail]
This command displays the runtime configured virtual channels for the specified DSL port(s).
382
= The slot and port(s) and VPI/VCI of the PVC.
= The name of an ATM profile.
= The type of encapsulation:
= Set a default VID (1 to 4094) for the channel. The channel can
only forward frames with this VLAN ID. The system would
drop any frames received from the subscriber that are tagged
with another VLAN ID.
Each PVC must have a unique VID since the system forwards
traffic back to the subscribers based on the VLAN ID.
= Set an IEEE 802.1p default priority (0 to 7) to add to incoming
frames without a (IEEE 802.1p) priority tag.
= The slot and port(s) and VPI/VCI of the PVC.
= Display in depth information about the runtime configured
virtual channels.
,
llc vcmux
Chapter 25 port Commands