ZyXEL Communications MSC1000G User Manual page 102

MSC1000G User's Guide
Table 27 Alarm Descriptions (continued)
ALARM
SHDSL_TCA_SES
SHDSL_TCA_CRC
SHDSL_TCA_LOSW
SHDSL_TCA_UAS
VDSL_TCA_LOL
VDSL_TCA_LOF
VDSL_TCA_LOS
VDSL_TCA_LPR
VDSL_TCA_ES
VDSL_TCA_SES
VDSL_TCA_UAS
Equipment
DC_POWER_FAIL
VOLTAGE_ERROR
TEMPERATUE_ERROR
FAN_ERROR
FAN_STOP_LOW_TEMP
HW_MONITOR_FAIL
COLD_START
102
SEVERITY MSC ALC SLC
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
CRITICAL X
CRITICAL X X
CRITICAL X X
CRITICAL X
MINOR X
CRITICAL X
INFO X
VLC DESCRIPTION
X The severely errored seconds (<value>) of
the endpoint (unit address <value>-<side>-
wire pair <value>) reached or exceeded the
threshold (<value>).
X The CRC anomalies (<value>) of the
endpoint (unit address <value>-<side>-wire
pair <value>) reached or exceeded the
threshold (<value>).
X The Loss Of Sync Word seconds (<value>)
of the endpoint (unit address <value>-
<side>-wire pair <value>) reached or
exceeded the threshold (<value>).
X The UnAvailable Seconds (<value>) of the
endpoint (unit address <value>-<side>-wire
pair <value>) reached or exceeded the
threshold (<value>)
X The Loss Of Link seconds (<value>) within
15 minutes for the atu(c or r) has reached
the threshold (<value>).
X The Loss Of Frame seconds (<value>)
within 15 minutes for the atu(c or r) has
reached the threshold (<value>).
X The Loss Of Signal seconds (<value>) within
15 minutes for the atu(c or r) has reached
the threshold (<value>).
X The Loss of Power (<value>) of 15-minute
interval of the atu(c or r) reaches threshold
(<value>)
X The Error Seconds (<value>) within 15
minutes for the atu(c or r) has reached the
threshold (<value>).
X The Severely Errored Seconds (<value>)
within 15 minutes for the atu(c or r) has
reached the threshold (<value>).
X The UnAvailable Seconds (<value>) within
15 minutes for the atu(c or r) has reached
the threshold (<value>).
The -48VDC power -<index> failed.
X The voltage <index> at input <value> is too
low <value>, or high <value>.
X The temperature <index> at input <value> is
too low <value> or high <value>.
The fan <index> speed <value> is too low
<value> or high <value>
The fan stopped due to low temperature.
X A hardware monitor diagnosis test failed.
System cold-start.
Chapter 6 Alarm Screens