Port Copy Command; Port Disable Command - ZyXEL Communications MSC1000G User Manual

MSC1000G User's Guide
The following example disables upstream carrier tone 8 for ADSL port 5 on the line card in
slot 7.
ras> port adsl uscarrier 7-5 00000080 0
This example disables upstream carrier tones 8 and 9 for ADSL port 5 on the line card in slot
7.
ras> port adsl uscarrier 7-5 00000180 0

25.4 port copy Command

Syntax:
port copy <source> <destination>
where
<source>
<destination>
This command copies the port settings from a source port to destination ports on the same type
of line card.
The following example copies the settings from DSL port 5 on the line card in slot 7 to all of
the DSL ports on the line card in slot 7.
ras> port copy 7-5 7-*

25.5 port disable Command

Syntax:
port disable <slot-port>
This command turns off the specified subscriber port(s).
The following example turns off DSL port 5 on the line card in slot 7.
ras> port disable 7-5
374
= The slot and port number from which you want to copy settings.
= The slot and port number(s) to which you want to copy settings.
Chapter 25 port Commands