Switch Bcastctrl Show Command - ZyXEL Communications MSC1000G User Manual

<mc-limit>
<uu-limit>
This command sets the limitations of broadcast, multicast and unknown unicast packets, in
packets per second for each Gigabit Ethernet port.
This example sets the subtending 1 interface to accept up to 80,000 broadcast packets, 100,000
multicast packets and 60,000 unknown unicast packets per second.
ras> switch bcastctrl threshold sub1 80000 100000 60000

28.4.2 switch bcastctrl show Command

Syntax:
switch bcasctrl show
This command displays the broadcast storm control settings. The following shows an
example.
ras> switch bcastctrl show
port broadcast(pkt/s) multicast(pkt/s) uucast(pkt/s)
---- ---------------- ---------------- ----------------
sub1
sub2
up1
up2
ras>
28.5 switch dot3ad Commands
Use the
switch dot31d
28.5.1 switch dot3ad lacp priority Command
Syntax:
switch dot3ad lacp priority <priority>
Chapter 28 switch Commands
= Sets how many multicast packets the interface is allowed to receive
per second. 0~262143, use -1 to disable.
= Sets how many unknown unicast packets the interface is allowed to
receive per second. 0~262143, use -1 to disable.
80000 100000
- -
- -
- -
commands to configure static and dynamic (LACP) port trunking.
MSC1000G User's Guide
60000
-
-
-
463