ZyXEL Communications MSC1000G User Manual page 273

Table 124 port Commands (continued)
COMMAND
alarmprof
pbo
pmms
set
show <slot>|<slot-
port>
tel <slot-port>
<telephone-
no>
tlspvc
delete
set
show
vdsl alarmprof
frametype
frequencyplan
priority
pvid
rfiband
Chapter 16 Commands
<slot-port>
span|stuc|stur|*
<alarmprofile>
<slot-port>
normal_epl|forced_e
pl|forced_no_epl
<value>
<slot-port> <mode>
<slot-port>
<profile_name>
<slot-port-vpi/vci> Removes a TLS PVC.
<slot-port-vpi/vci>
<profile> llc|vcmux
<vid> <priority>
<slot>|<slot-
port>|<slot-port-
vpi/vci>
<slot-port>
<profile>
<slot-port>
<all|tag>
<slot-port>
<997|998>
<slot-port>
<priority>
<slot-port> <vid>
<slot-port>
<disable|ansi|etsi|
custom>
MSC1000G User's Guide
DESCRIPTION
Sets SHDSL ports or end point(s) to use an
alarm profile.
span = set alarm profile for the whole span
stuc = set alarm profile at stuc end point
stur = set alarm profile at stur end point
*
= set alarm profile at both stuc and stur
Sets power backoff for SHDSL port(s).
normal_epl
= Power backoff with EPL
(Estimated Power Loss).
forced_epl = Forced power backoff
with EPL.
forced_no_epl
= Forced power
backoff without EPL.
<value> = 0~31 in dB
Sets the negotiated noise margin mode of
the SHDSL port(s).
<mode> = negotiated noise margin mode,
normal|forced
Sets SHDSL port(s) to use a profile created
by the profile shdsl set
command.
Displays port settings.
Records a DSL port(s) subscriber's
telephone number.
Commands to configure Transparent LAN
Service (TLS) or VLAN stacking on the
PVCs.
Sets/changes TLS PVC settings.
Displays the settings for a TLS PVC.
Sets the VDSL port(s) to use the specified
alarm profile.
Sets the acceptable frame type on the
VDSL port(s).
Sets the band plan the VDSL port(s) uses.
Sets the VDSL port(s) VLAN priority (0 - 7). M
Sets the port VID on the VDSL port(s).
Selects an RFI band or disables this
feature.
P
M
M
M
M
L
M
M
M
L
M
M
M
M
M
273