Multicast Bandwidth Port Commands; Multicast Bandwidth Port Disable Command; Multicast Bandwidth Port Enable Command; Multicast Bandwidth Port Set Command - ZyXEL Communications MSC1000G User Manual

MSC1000G User's Guide
This command configures bandwidth allocation for the multicast channel(s). For multicast
channel(s) for which you have not configured bandwidth settings, the default multicast
bandwidth setting applies (refer to
The following example sets the bandwidth allowed for the specified multicast channels to
1000 Kbps.
ras> multi

24.3 multicast bandwidth port Commands

Use these commands to configure multicast bandwidth limitation on specified ports.

24.3.1 multicast bandwidth port disable Command

Syntax:
multicast bandwidth port disable <slot-port>
This command deactivates multicast bandwidth settings of the specified port.

24.3.2 multicast bandwidth port enable Command

Syntax:
multicast bandwidth port enable <slot-port>
This command activates multicast bandwidth setting on the specified port.

24.3.3 multicast bandwidth port set Command

Syntax:
multicast bandwidth port set <slot-port> <bandwidth>
This command sets the bandwidth allowed for multicast traffic on the specified port(s).
This following example sets the multicast bandwidth limit to 1000 kbps on port 1 on the line
card in slot 3.
ras> multicast bandwidth port set 3-1 1000
348
Section 24.2.1 on page
band set 1 230.230.1.1 230.230.1.10 1000
347).
Chapter 24 multicast Commands