Profile Acl Commands - ZyXEL Communications MSC1000G User Manual

MSC1000G User's Guide
Table 142 profile Commands (continued)
COMMAND
vdsl

26.3 profile acl Commands

An ACL (Access Control Logic) profile allows the system to classify and perform actions on
the upstream traffic.
26.3.1 profile acl delete Command
Syntax:
profile acl delete <profile>
This command removes the specified ACL profile.
Note: You cannot remove the ACL profile(s) that is currently in use.
26.3.2 profile acl map Command
Syntax:
402
show [<profile>]
delete <profile>
map <profile>
set <profile> <us-
max-rate> <ds-
max-rate>
[fast|delay <us-
delay> <ds-
delay>]
[minrate <us-min-
rate> <ds-min-
rate>]
[usmgn <us-max-
mgn> <us-min-mgn>
<us-tgt-mgn>]
[dsmgn <ds-max-
mgn> <ds-min-mgn>
<ds-tgt-mgn>]
show [<profile>]
profile acl map <profile>
DESCRIPTION
Lists the SHDSL port setting profiles or
a specific profile's settings.
VDSL profiles allow efficient
configuration of VDSL port settings.
Removes a VDSL port settings profile.
Displays which VDSL ports reference
this profile.
Creates a VDSL line profile. "us" is
UpStream, "ds" is DownStream
us maximum rate = 64~45440 in Kbps
ds maximum rate = 64~100032 in Kbps
us/ds delay = 1~255 in ms
us minimum rate = 64~4096 in Kbps
ds minimum rat e= 64~32000 in Kbps
max noise margin = 0~310 in 0.1 dB
min. noise margin = 0~310 in 0.1 dB
target noise margin = 0~310 in 0.1 dB
Lists the VDSL port setting profiles or a
specific profile's settings.
Chapter 26 profile Commands
P
L
M
L
M
L